New Liquid Handling products from CELLTREAT are now available at Pipette.com!
PCR Products
- Ultra-thin tube walls provide uniform and efficient heat transfer
- Avoid sample loss from evaporation with easy open and close caps
- Angled attached caps prevent interference when several strips are racked simultaneously
- Certified RNase/DNase/PCR Inhibitor/DNA-free and non-pyrogenic to ensure reliable experimental results
- White tubes with attached optically clear caps enhance weak fluorescent signals (230465)
- All flat caps are optically clear
| TUBE & CAP, PCR 8-Strip 0.2mL Tube & Dome Cap, Non-sterile (Tubes and Caps Packed Separately) |
230451 |
| TUBE ONLY, PCR 8-Strip Tubes, 0.2mL, Clear, Non-sterile |
230446 |
| TUBE ONLY, PCR 8-Strip Tubes, 0.1mL, Clear, Non-sterile |
230447 |
| CAP ONLY, PCR 8-Strip Optically Clear Flat Caps, Non-sterile |
230448 |
| CAP ONLY, PCR 8-Strip Dome Caps, Clear, Non-sterile |
230449 |
| PCR 8-Strip Tubes, 0.1mL, Attached Flat Caps, Clear, Non-sterile |
230464 |
| PCR 8-Strip Tubes, 0.1mL, Attached Optically Clear Flat Caps, White Tubes, Non-sterile |
230465 |
Sealing Films
PCR Plates + Clear Sealing Films = the perfect pair!
- Clear Sealing Film is optically clear with low auto-fluorescence, ideal for qPCR applications
- Pressure-activated adhesive is non-tacky and creates a strong bond when applied with a sealing paddle or roller
- Non-activated portions remain non-tacky, making this film suitable for dry samples
- Black and white film is suitable for application on the top or bottom of black and white multiple well plates
- Easily cover clear bottom black or white plates to prepare for top-reading analytical equipment
- Black film absorbs stray light and fluorescence, dampening background noise and improving signal clarity
- Place black film on top of black plates to fully shield light-sensitive samples
- Pierceable Sealing Film: Easily retrieve individual well samples without removing or puncturing sealing film
- Pierceable Sealing Film: Pre-cut flaps over each well allow easy manual or robotic pipette tip entry without the risk of adhesive residue contamination
- Pierceable Sealing Film: Flaps self-seal after pipette tip is removed, ideal for short-term storage of precious samples
- Pierceable Sealing Film: Boldly printed alignment circles ensure accurate film placement on standard 96 well plates
- Pierceable Sealing Film: Each well is individually alphanumerically labeled
| Clear Sealing Film, Pressure Activated, Non-sterile |
229134 |
| Pierceable Sealing Film, Sterile |
229136 |
| Pierceable Sealing Film, Non-sterile |
229137 |
| Light Enhancing Sealing Film, White, Non-sterile |
229140 |
| Light Absorbing Sealing Film, Black, Non-sterile |
229141 |
| Transparent Microplate Sealing Film, Sterile |
229142 |
| Transparent Microplate Sealing Film, Non-sterile |
229143 |
Cell Strainers
New sizes designed for 15mL and 500mL Centrifuge Tubes
- Versatile design of 15mL Cell Strainers accommodates a wide range of tubes, from 0.5 mL Micro Tubes through 15 mL Centrifuge Tubes
- Stackable design allows for serial filtration
- Upper cup can be removed and inverted to collect residual cells
- These large diameter 500 mL Cell Strainers are designed for use with 500 mL Centrifuge Tubes (229463)
- Accommodates tubes with inner neck diameters between 35 and 40 mm
- Can be used for many applications including isolating cells and removing clumps or debris
- Hydrophilic treatment increases flow and reduces the effects of surface tension
- Polypropylene housing with nylon mesh filter eliminates the need to fabricate filters from gauze, paper, nylon mesh, or other materials
- Extended lip on housing enables aseptic handling with forceps
- Elongated gripping tab on housing for easy handling
| 15mL Tube Cell Strainer, 40μm, Blue, Individually Wrapped, Sterile |
230471 |
| 15mL Tube Cell Strainer, 70μm, White, Individually Wrapped, Sterile |
230473 |
| 15mL Tube Cell Strainer, 100μm, Yellow, Individually Wrapped, Sterile |
230475 |
| 500mL Tube Cell Strainer, 70μm, White, Individually Wrapped, Sterile |
230493 |
Polystyrene Tubes
- Polystyrene is optically clear for easy viewing of sample or colorimetric testing
- Tubes feature molded graduations
- Easy to write on flat surface polyethylene (HDPE) caps
- Plastic rack is manufactured from polypropylene and is autoclavable, reusable, and recyclable
- Design of bottom prevents racks from sticking/freezing to surfaces
- Widely spaced design catches drips and allows tubes to be retrieved more easily
- Graduated: Yes
- Graduation Increments (Subdivisions): 2.5-5 mL
- Max Force (RCF)g: 1000
| 50mL Polystyrene Centrifuge Tube - Plastic Rack, Sterile |
229490 |