Multichannel Pipettes are the easiest way to increase your output and productivity, while reducing assay, testing and production costs at the same time. By purchasing a multichannel pipette for your laboratory, you can instantly increase pipetting productivity by 8-, 12-, or even 64-fold (depending on whether you prefer an 8-channel,12-channel, or higher channel pipette). This immediately creates more time in the day for a scientist or lab technician. Instead of spending hours transferring samples to plates, you can reduce the task to minutes. Multichannel pipettes can increase the throughput of your lab and free-up valuable lab time to be spent on tasks other than time-consuming and repetitive pipetting.
Pipette.com Calibration Facility
Pipette.com is an ISO 17025 Accredited Calibration Facility that calibrates and repairs all pipette brands and models.
Services We Provide
|Is This Right For My Lab?||
|Calibration Overview||Pipettes are confirmed to be within or out of manufacturer’s specifications in an environmentally controlled facility.||Pipettes undergo preventive maintenance (PM) and calibrated to manufacturer specifications.||Pipettes undergo verification first, and then preventive …?|
|Benefits||Pipettes are confirmed to be within or out of manufacturer’s specifications. This is also a cost-effective way to obtain a calibration due date on new pipettes facility.||Preventative maintenance (PM) proactively replacing parts that are known to fail before they affect the performance of the pipette. Many pipettes that are out of tolerance fail because PM parts have worn out.||You can demonstrate your pipettes are within calibration range before they undergo preventative maintenance and calibration. Alternatively, if your pipettes are out of tolerance, you can adjust future calibration intervals to be closer together.|
Calibration Services Glossary
Pipettes undergo a Leakage Test, Functional Test, and Calibration Check are performed with 4x2 weighings.
Each pipette is completely dissembled, cleaned inside & out, pistons are polished & re-greased, and seals &/or o-rings are replaced as needed (as specified by the manufacturer, make, & model) then reassembled. Parts that can wear-out are proactively replaced
Online Data Reports Retrieving & Pipette Management Tool
Instantly access a pipette's history, calibration reports and calibration due date on line with our free pipette management tool
Every pipette undergoes 4x2 weighings (2 at low volume & 2 at high volume as specified by manufacturer requirements) in an environmentally controlled calibration facility. Extended calibration points & weighings, and individual channel calibration for multichannel pipettes are available upon request
3rd Point Reading (per channel)
Median point (4 weighings) can be added to any calibration order
Extended 10×2 Readings (per channel)
Extended Measurements takes 10 measurements at 2 data points (10×2) to provide more statistical data compared to the 4×2 weighings
Multi-Channel Readings (per channel)
Each channel of the multichannel pipette is individually adjusted, weighed, and calibrated. Recommended for precise, quantitative work
Removes existing DNA and RNA contamination, such as over aspirated oligonucleotides
Complimentary Paper Report
Each Report provides detailed pipette information, mean, standard deviation, and variance of weighings, pipette performance status listed as Pass/ fail, lab conditions during the calibration process, list of parts used in repair, computer-generated barcode linking to online report
Every serviced pipette receives a calibration or verification sticker with a scannable barcode and comprehensive information including the calibration date, next calibration due date, and serial number. Optional information such as user, equipment number and location can also be included on the label
Automated Email Reminders for Your Next Calibration Service Date
You can choose to be notified via email 4 weeks to 6 weeks before the pipette calibration due date
Printed Copy of GMP/ GLP Calibration Report
Includes all of the features of the complimentary report plus the individual weighings in addition to the mean, a dedicated certificate for each pipette, detailed information on the equipment utilized by Pipette.com, and detailed technician information
24 Hour Service
1 Business day pipette calibration turn-around is available for $10 per pipette
Frequently Asked Questions
What is pipette calibration?
It is a process of examining and/or adjusting the pipettes to the true value by comparison to the standard which is set by the manufacturer of that said pipette. The standard in this case is the pipetting range set by the pipette manufacturer to be accurate and precise at low volume and high volume of the pipette. At Pipette.com, we perform metrology based pipette calibration; Metrology based pipette calibration provides a platform where the process is done within strict guidelines of National Institute of Standards and Technology (NIST). This ensures that there is a methodology and a standard set for all of the equipment used to calibrate the pipettes
Why is metrology based pipette calibration important?
Metrology is defined as a science of measurement. Metrology based pipette calibration provides a platform where the process is done within strict guidelines of National Institute of Standards and Technology (NIST). This ensures that there is a methodology and a standard set for all of the equipment used to calibrate the pipettes. If this standard is not followed there cannot be a statistical guarantee that your results are accurate to true standards. Science is based on reproducible results. When reproducible results cannot be achieved all work is voided. Thus, scientists must strive that all of their work is reproducible. In order to achieve reproducibility scientists must have accurate and precise equipment. Pipettes are the cornerstone of all research, thus they must always be precise and accurate. In order to achieve this scientists must choose pipette service providers that follow strict metrology guidelines. Providers whose equipment is also calibrated and follows strict NIST rules can provide accurate and precise results giving you informative data on the status of your work and your pipette. Without metrology based calibration one cannot statistically say if the pipette is truly within range, it is simply an assumption using an uncertified piece of equipment
Are your technicians trained by manufacturers?
Are your technicians trained by manufacturers?
What types of pipettes do you repair & calibrate?
Single channel manual pipettes and electronic pipettes Multichannel manual pipettes and electronic pipettes 4-channel pipettes 6-channel pipettes 8-channel pipettes 12-channel pipettes 16-channel pipettes 48-channel pipettes 64-channel pipettes 96-channel pipettes Positive displacement pipettes Repeaters Bottletop dispensers Burettes Motorized controllers
Can you calibrate Rainin pipettes?
Yes, we can calibrate Rainin pipettes and repair Rainin pipettes
What brands of pipettes do you repair & calibrate?
Accupet Pipettes Biohit Pipettes BrandTech Pipettes CAPP Pipettes Cole-Palmer Pipettes Drummond Pipettes Eppendorf Pipettes Labnet Pipettes Matrix Pipettes Nichiryo Pipettes Oxford Lab Products Rainin Pipettes Sartorius Pipettes Socorex Pipettes Falcon Pipettes Gilson Pipettes Hamilton Pipettes Heathros Pipettes Hirschmann Pipettes Integra Bioscienc Pipettes Jencons Pipette
Do you repair Pipet-Aids?
Yes, we can repair Pipet-Aids and motorized controllers
What is preventative maintenance (PM)?
Preventative Maintenance (PM) is a step in the calibration process that greatly enhances the longevity of your instrument. PM includes full disassembly, interior & exterior cleaning, piston polishing & re-greasing, and new seals/o-rings are replaced as needed. An in-depth PM process helps keep your pipettes operating at peak performance in between your regularly scheduled calibration service dates
Do you perform calibration on site?
No, we do not offer any onsite services due to limited control of environmental conditions (i.e. temperature, humidity, air flow, and direct sunlight) and use the proper equipment (ultra-micro balances situated on marble tables). The American Association for Laboratory Accreditation (A2LA), published a policy in 2012 stating that higher measurement uncertainties are expected from onsite calibration. View that policy here: A2LA Policy P104
Accuracy & Precision is important when I use my multichannel pipette, what calibration plan would you recommend?
We recommend adding individual channel calibration for your multichannel pipette if you need each channel to be precise and accurate (such as when preforming RT-PCR, ELISA, ECL and Bioassays). This means each channel is individually adjusted, weighed, and calibrated. To add this to any pipette calibration service, check the box for “Multi-Channel Readings (per channel) on the “Pipette Service Order Form”
How much does it cost to fix my broken pipette?
We provide free repair estimates once the broken pipette is in our calibration facility. We only charge you for pipette calibration and replacement parts